防爆橡膠軟管組成

由活接頭與連接管組成；連接管由內管與護套組成；
活接頭由不銹鋼制作或優質碳素鋼電鍍處理；
內管由波紋管或金屬軟管制成，具有良好耐腐性；
具有阻燃、耐腐蝕、耐水、耐老化、撓性良好、結構牢固、工工作可靠等特點；
螺紋尺寸規格可根據用戶要求特殊加工，如NPT螺紋、英制以及公制螺紋等；
防爆撓性管長度，常規供貨有500mm、700mm、1000mm可供選擇，也可根據用戶需求訂制其它長度；

防爆橡膠軟管應用

1.適用于爆炸性氣體環境1區、2區；
2.適用于可燃性粉塵環境20區、21區、22區；
3.適用于ⅡA、ⅡB、ⅡC級爆炸性氣體環境；
4.適用于溫度組別為T1~T6的環境；
5.適用于石油采煉、儲存、化工、醫療設施等爆炸性危險環境；
6.產品主要作為產品與鋼管布線系統中的連接之用。

使用

首先檢查防爆撓性管框架、風葉有無變形，扇葉轉動是否靈活，有無磨擦現象。檢查所有緊固件是否齊全、擰緊，應有防爆合格證編號。線路電壓必須與電機上額定電壓相符。用500V兆歐表檢查電動機的絕緣電阻，其電阻值若小于5MΩ,則應用烘干法或短路電流法進行干燥處理,使其絕緣電阻大于5MΩ。必須配用小型防爆開關作電源開關，或將普通開關安裝于室外無爆炸危險性的地方。接電源的電纜外徑應與密封圈相符，擰緊、壓緊螺母后應保證密封圈與電纜間，密封圈與出線咀間無間隙，否則將失去隔爆性能。

訂貨舉例：

1、若需訂購防爆撓性連接管，材質為PVC、管通徑為15mm、長度為500mm，一端內螺紋一端外螺紋、螺紋規格為G1/2”，則訂貨型號為“CBR-15×500B”；
2、若需訂購粉塵防爆撓性連接管，材質為不銹鋼、管通徑為20mm、長度為700mm，結構型式為一端內一端外螺紋，內螺紋規格為G3/4”，外螺紋規格為M25×1.5，則訂貨型號為“BNG-20×700C(G3/4內M25×1.5外)”。